NEC MultiSync XG85RP-CH Setup Manual

Also see for MultiSync XG-1352C: Operation manual

Contents

NEC MultiSync XG85RP-CH Setup Manual Manual pdf 19 page image

19BEFORE SET-UPStoring Projector Settings (Automatic Save Feature)You have two options to store projector settings in the memory:automatically and manually.STORE ?CURRENT NEW CANCEL• The Automatic Save Feature mode has been set to DISABLE byfactory. For information on setting, see “Automatic Save Feature”on page 92.mWhen the Automatic Save Feature mode is set to “ENABLE”,projector settings will be stored in the projector’s memoryautomatically.Settings are stored automatically when any one of the followingprocedures is performed:• The END button is pressed several times to return the adjust-ment screen to the source screen.• One input is switched to another.• The projector is turned off.• After every 10 minutes of elapsed time.mWhen the Automatic Save Feature mode is set to “DISABLE”,projector settings can be stored in the projector’s memorymanually.When you try to return the source screen by pressing ENDseveral times, the “STORE ?” menu is displayed.To manually save settings, proceed as follows:1. Use the END button to display the “STORE” menu from thecurrent adjustment screen or menu.2. Use the CURSOR or button to highlight “CURRENT”,“NEW”, or “CANCEL” and press ENTER.Items to select• CURRENT ------ Overwrites the currently projected signal andsaves the settings. NOTE: An unregistered signalcannot be stored under the ''CURRENT''settings.• NEW ------------ Starting at memory location No.51, this functionsaves an unregistered signal as a new signal inmemory.• CANCEL -------- Does not save settings.NOTE: Storing time is four seconds.