Configuring Your Server 4-85Battery for Onboard RAID (MegaRAID ROMB)This section describes the features operations of battery for onboard RAID (MegaRAID ROMB).FeaturesThe onboard RAID (MegaRAID ROMB) has factory-installed battery.With the following features, the possibility of data loss due to an unexpected accident (e.g., aninstantaneous power failure which may occur in Write Back mode) can be avoided. Backup of data in cache memory of disk array controller Improvement of reliability in Write Back mode Adoption of reusable nickel hydrogen batteryChecking Battery StatusUse the disk array management utility MegaRAID Storage Manager to check status of battery foronboard RAID (MegaRAID ROMB).1. Start OS, and run MegaRAID Storage Manager (MSM).2. If the battery is properly connected, the [Battery Backup Unit] icon is shown under the[Physical] tab at the left frame of MSM.[Battery Backup Unit] iconPhysicalNOTE: If the battery is properly connected, the status of "BatteryBackup" is indicated as "Present" in [Adapter Properties] menu ofWebBIOS.
