Installing and Using Utilities 6-5Express Setup"Express Setup" is intended for initial setup of the server. Its automatic installation mode guidesthe user easily through the process by detailing specific hardware features and providing screenprompts for software selection and configuration. The program loads the utilities and drivers,applies RAID settings, partitions the disk, and installs the desired operating system.If you install Windows Server 2003, after a few tasks are completed, all that remains to be done is toremove the NEC EXPRESSBUILDER CD-ROM and install the Windows CD-ROM, input aproduct ID number, and acknowledge the license agreement.IMPORTANT: The Express Setup is intended for the initial setup of the serversystem and, therefore, the Express Setup clears the contents of thehard disk. When the setup is started, do not turn off the server until the setupis completed, and also make sure not to remove the "ConfigurationDiskette" from the floppy disk drive until the message that allowyou to remove it appeared.Tools"Tools" is also intended for initial setup of the server. It provides more installation options thanExpress Setup and permits the user to quickly create utility support disks, run the Off-lineMaintenance Utility and system diagnostic utility, set up a maintenance partition, and update thevarious BIOS programs.Tools MenuSave/Restore RAID Configuration DataOff-line Maintenance UtilitySystem DiagnosticsCreate Support DiskSetup Maintenance PartitionBIOS/FW/etc. UpdateRAID Board: PresentTotal Drives: 1Drives in Group: 1Hot Spares: 1RAID Level: 7Write Mode: WRITE_THRUMaint Part: PresentSystem ManagementHelpReturn to the Top Menu Save/Restore RAID Configuration DataThe item allows the configuration information on the disk array system to be saved orrestored from the floppy disk.– Save Disk Array Configuration DataThe configuration information on the disk array controller is saved into thefloppydisk. If you set or change RAID, always use this function to save theconfiguration information into a floppy disk.
