NEC N8406-022A Reference Manual

Also see for N8406-022A: Application guide

Contents

NEC N8406-022A Reference Manual Manual pdf 35 page image

Command Line Interface 35Table 22 SNMPv3 Community Table parametersField DescriptionName Displays the community string, which represents the configuration.User Name Displays the User Security Model (USM) user name.Tag Displays the community tag. This tag specifies a set of transport endpoints from which acommand responder application accepts management requests and to which a commandresponder application sends an SNMP trap.SNMPv3 Target Address Table informationCommand: /info/sys/snmpv3/taddrName Transport Addr Port Taglist Params---------- --------------- ---- ---------- ---------------trap1 47.81.25.66 162 v1v2trap v1v2paramThis command displays the SNMPv3 target address table information, which is stored in the SNMP engine.The following table describes the SNMPv3 Target Address Table information.Table 23 SNMPv3 Target Address Table parametersField DescriptionName Displays the locally arbitrary, but unique identifier associated with thissnmpTargetAddrEntry.Transport Addr Displays the transport addresses.Port Displays the SNMP UDP port number.Taglist This column contains a list of tag values which are used to select target addresses for aparticular SNMP message.Params The value of this object identifies an entry in the snmpTargetParamsTable. The identifiedentry contains SNMP parameters to be used when generating messages to be sent to thistransport address.SNMPv3 Target Parameters Table informationCommand: /info/sys/snmpv3/tparamName MP Model User Name Sec Model Sec Level------------------- -------- -------------------- --------- -----------v1v2param snmpv2c v1v2only snmpv1 noAuthNoPrivThe following table describes the SNMPv3 Target Parameters Table information.Table 24 SNMPv3 Target Parameters TableField DescriptionName Displays the locally arbitrary, but unique identifier associated with thissnmpTargeParamsEntry.MP Model Displays the Message Processing Model used when generating SNMP messages usingthis entry.User Name Displays the securityName, which identifies the entry on whose behalf SNMP messageswill be generated using this entry.Sec Model Displays the security model used when generating SNMP messages using this entry. Thesystem may choose to return an inconsistentValue error if an attempt is made to set thisvariable to a value for a security model which the system does not support.Sec Level Displays the level of security used when generating SNMP messages using this entry.