Command Line Interface 41Trunk group informationCommand: /info/l2/trunkTrunk group 1, EnabledProtocol - Staticport state:20: forwarding21: forwarding22: forwarding23: forwarding24: forwardingWhen trunk groups are configured, you can view the state of each port in the various trunk groups.Layer 3 informationCommand: /info/l3[Layer 3 Menu]arp - ARP Information Menuip - Show IP informationigmp - Show IGMP Snooping Multicast Group informationdump - Dump all layer 3 informationThe following table describes the Layer 3 Information Menu options.Table 29 Layer 3 information menu optionsCommand Usagearp Displays the Address Resolution Protocol (ARP) Information Menu.ip Displays IP Information. IP information, includes:• IP interface information: Interface number, IP address, subnet mask, VLAN number, andoperational status.• Default gateway information: Metric for selecting which configured gateway to use,gateway number, IP address, and health status• IP forwarding information: Enable status, lnet and lmask• Port statusigmp Displays IGMP Information Menu.dump Dumps all switch information available from the Layer 3 Menu (10K or more, depending onyour configuration).If you want to capture dump data to a file, set your communication software on yourworkstation to capture session data prior to issuing the dump commands.
