Command Line Interface 81Operations MenuIntroductionOperations-level commands are used for making immediate and temporary changes to switch configuration. TheOperations Menu is used for bringing ports temporarily in and out of service. This menu is available only from anadministrator and operator login.Menu informationCommand: /oper[Operations Menu]port - Operational Port Menupasswd - Change current user passwordclrlog - Clear syslog messagestnetsshc – Close telnet/SSH connectionsntpreq - Send NTP requestThe following table describes the Operations Menu options.Table 83 Operations Menu optionsCommand Descriptionport <port number> Displays the Operational Port Menu.passwd <1-128characters>Allows the user to change the password. You need to enter the current password inuse for validation.clrlog Clears all Syslog messages. This command is available only from an administratorlogin.tnetsshc Closes the telnet and SSH connections.ntpreq Allows the user to send requests to the NTP server. This command is availableonly from an administrator login.Operations-level port optionsCommand: /oper/port <port number>[Operations Port 1 Menu]ena - Enable portdis - Disable portcur - Current port stateOperations-level port options are used for temporarily disabling or enabling a port.Table 84 Operations-Level Port Menu optionsCommand Descriptionena Temporarily enables the port. The port will be returned to its configured operation modewhen the switch is reset.NOTE: This command does not enable a port that has been disabled by an ekeying mismatch error.dis Temporarily disables the port. The port will be returned to its configured operation modewhen the switch is reset.cur Displays the current settings for the port.
