NEC N8406-022A Reference Manual

Also see for N8406-022A: Application guide

Contents

NEC N8406-022A Reference Manual Manual pdf 77 page image

Command Line Interface 77HTTPS Access configurationCommand: /cfg/sys/access/https[https Menu]access - Enable/Disable HTTPS Web accessport - HTTPS WebServer port numbergenerate - Generate self-signed HTTPS server certificatecertSave - save HTTPS certificatecur - Display current SSL Web Access configurationThe following table describes the HTTPS Access Configuration menu options.Table 78 HTTPS Access Configuration menu optionsCommand Descriptionaccess enable|disable Enables or disables BBI access (Web access) using HTTPS. The default value isdisabled.port <TCP port number> Defines the HTTPS Web server port number. The default is 443.generate Allows you to generate a certificate to connect to the SSL to be used during the keyexchange. A default certificate is created when HTTPS is enabled for the first time.The user can create a new certificate defining the information that they want to beused in the various fields. For example:• Country Name (2 letter code) [ ]: JP• State or Province Name (full name) [ ]: Tokyo• Locality Name (for example, city) [ ]: Fuchu• Organization Name (for example, company) [ ]: NEC• Organizational Unit Name (for example, section) [ ]: SIGMABLADE• Common Name (for example, user’s name) [ ]: Taro• Email (for example, email address) [ ]: info@nec.comYou must confirm if you want to generate the certificate. It takes approximately30 seconds to generate the certificate. Then the switch restarts SSL agent.certSave Allows the client, or the Web browser, to accept the certificate and save thecertificate to Flash to be used when the switch is rebooted.cur Displays the current SSL Web Access configuration.Watchdog configurationCommand: /cfg/sys/watchdog[Watchdog Menu]interval - Set watchdog timeout intervalenable - Enable Watchdogdisable - Disable Watchdogcur - Display current Watchdog configurationThe following table describes the HTTPS Access Configuration menu options.Table 79 Watchdog Configuration menu optionsCommand Descriptioninterval <5-120> Sets the watchdog timeout interval. The default is 30 seconds.enable Enables watchdog. The default is enabled.disable Disables watchdog.cur Displays the current Watchdog configuration.