Windows Setup and Operation 3-37Evaluate Start and Stop of CPU ModulesThis section describes how to confirm the continuous system operation after stopping one of theCPU modules.1. Confirm that the CPU modules are duplicated.To check if the CPU modules are duplicated, see the status LEDs of the CPU modules.[Indicat[Indications of status LEDs when CPU modules are duplicated]LED CPU module 0(Operating)CPU module 1(Operating)1 CPU/IO module status LED1 - -2 CPU/IO module status LED2 Green Green3 DISK ACESSS LED Green blinking Green blinking2. Use the ft server utility to stop the operation of a CPU module to remove.From [Start], select [All Programs], [NEC ESMPRO Agent] then [ft server utility] to start theft server utility. Then, from the ft server utility, select [CPU Module] then the CPU module tostop (*) from the [FTSever] tree on the left pane, and click [Down] of [Bring Up/BringDown].* As for the CPU module to stop, select [CPU Module(ID:0)] to stop CPU module 0, select[CPU Module(ID:1)] to stop CPU module 1.
