INTRODUCTION– 1 – NWA-008853-001 Rev.3.097ch0001.fmINTRODUCTIONPURPOSEThis manual explains the hardware installation and the programming procedure for providing CommonChannel Inter-Office Signaling (CCIS) system to the NEAX 2000 IPS System.OUTLINE OF THIS MANUALThis manual consists of five chapters. The following paragraphs summarize Chapters 1 through 5.CHAPTER 1 GENERAL INFORMATIONThis chapter explains the system outline, the name and functions of circuit cardsrequired, system capacity, time slot assignment condition, system specifications,available service features with No. 7 CCIS, and network structure considerationsfor CCIS system.CHAPTER 2 INSTALLATIONThis chapter explains the required equipment and the hardware installationprocedure to provide CCIS system.CHAPTER 3 SYSTEM DATA PROGRAMMINGThis chapter explains the programming procedure for providing CCIS to thesystem, and also explains the general description, programming procedure,operating procedure, and hardware requirement of each service feature.CHAPTER 4 CIRCUIT CARD INFORMATIONThis chapter explains the mounting location, the meaning of lamp indications, andthe switch settings of each CCIS circuit card.CHAPTER 5 OPERATION TESTThis chapter explains inter-office test procedure for basic DTI/CCT functions.JANUARY/31/2006PURPOSE/OUTLINE OF THIS MANUAL
