CHAPTER 3 SYSTEM DATA PROGRAMMING– 140 – NWA-008853-001 Rev.3.097ch3002.fmBROKERAGE-HOT LINE-CCISGeneral DescriptionThis feature provides a ringdown connection between two stations, each using a Dterm, in different officesin the CCIS network.ProgrammingDESCRIPTION DATAAssign the Virtual Line station number to therequired Virtual LEN.(1)(2)000-255: Virtual LENX-XXXXXXXX: Virtual Line station No.Assign the Hot Line to the Virtual Line stationsassigned by CM11.•(1)(2)Y=03X-XXXXXXXX: Virtual Line station No.04: Hot LineAllocate the memory area for the Hot Line-Outside call.For example, to assign the 10 Hot Line-Out-side calls into No. 100 through No. 109 Mem-ory Slots, 2nd data is “100010”. AbbreviatedCodes are automatically assigned as shown be-low:(1)(2)65: For Hot Line-OutsideXXX YYYXXX: 000-299 (Starting Memory Slot No.in blocks)YYY: 001-300 (No. of Memory Slots to beassigned in blocks)Assign the destination party’s number andname to each Memory Slot number.•(1)(2)Y=0000-299: Memory Slot No.XXXX YY...YXXXX: Access Code (Maximum 4 digits): Separator MarkYY...Y : Calling Party’s No.(Maximum 26 digits)•(1)(2)Y=1000-299: Memory Slot No.XXX...X: Station Name Character Code(Maximum 32 digits: 16 charac-ters)See CM77 in the Command Manual.STARTCM11CM12CM71Memory Slot 100Memory Slot 109~Abbrev. Codes0009~CM72,,ABROKERAGE-HOT LINE-CCIS
