CHAPTER 3 SYSTEM DATA PROGRAMMING– 183 – NWA-008853-001 Rev.3.097ch3002.fmCALLING NUMBER DISPLAY-CCISGeneral DescriptionThis feature permits the number of a calling or called party at another switching office to be displayed ei-ther on a D term or an Attendant Console.To transfer the calling party number received from the network (ISDN CPN/Caller-ID/MFC or T1-ANI)transparently between the offices on the CCIS network, assign the following data.The calling party number sent from the network over CCIS can be displayed on the LCD of the station ofanother office over CCIS, and can be sent to the SMDR. It can be sent to also the MCI, if the system pro-vides the MCI with ANI.ProgrammingDESCRIPTION DATAProvide the system with the Name Display ser-vice for Office B.(1)(2)2551 : To provideProvide the system with Caller ID Display fea-ture for CCIS calls for Office A and B.(1)(2)3790: To provideSpecify the duration of displaying the namewhen the incoming call is answered/the selectkey for Calling Number Display and CallingName Display or CID key is pressed.[Series 3300 software required]Specify the duration of displaying the destina-tion information when the outgoing call is an-swered by the destination via CCIS.[Series 3300 software required](1)(2)(1)(2)5370 : Until call is finished/key is pressedagain1 : 6 seconds5380 : Until call is finished1 : 6 secondsOffice A Office BISDN CPN/Caller-ID/MFC-ANI/T1-ANICalling Party Number CCISTransparent Display ofCalling PartyNumber on LCDSending ofCalling PartyNumber toMCI/SMDRSTARTCM08ACALLING NUMBER DISPLAY-CCIS
