Using the Function Utilities5-25FUNCTIONSEL. 1-8 / or FUNCTION7 RELAY INITIATE-SEL. RELAY STATION-NOTEThe following conditions must be met for Relay Initiate function:•The fax on the receiving party is either NEFAX805/635/637/647/655.•The receiving party must register the One Touch key or Group dial key for relayfunction.•The receiving party must register one Speed Dial for send report.5.7 Relay InitiateOverview of the Relay Initiate functionRelay TX allows the operator to make one long distance call to a remote unit and theremote unit will relay the message to one or more fax units in the local area. With thisfunction, you can save valuable time and telephone charges. This function can also instructthe remote fax machine to send an TX Result report to one of its Speed Dial locations.How to use the Relay Initiate function1. Put the original document into the documentfeeding tray.2. Press the Function key.3. Press ‘7’ to select the “RELAY INITIATE TX”.The following message appears briefly toconfirm your selection.4. Select a One-Touch key that registered as theremote fax unit(Relay station).Function7PQRS
