Using the Enhanced Utilities (2)2 RESOLUTION*STD F S/F H/T◄ , ► & YES3 PAGE COUNT TX*ON OFF◄ , ► & YES*STD FINE S/F◄ , ► & YES2. Press "2" of Numeric keys. Then the ABC2following message appears briefly to confirmyour selection.3. Press ◄ or ► key to select the desiredresolution as default setting (Standard /Fine/Super Fine /Half Tone)and then press Yeskey.If you select “H/F” then the messageappears to ask the quality of Half tone,PRESS ◄ or ► key to select the desiredsetting, then press the Yes key to accept thisselection.4. Press No/Clear key, back to the initial state. NoC7.3.3 Setting PAGE COUNT TXWhen Page Count TX is set to ON, before transmit the original documents are scannedinto memory and judged whether the page count is correct or not. This function is used toensure the original documents are not misfed in Document Feeding Tray.Utility1.Press the Utility key 4 times then the displayappears the message “TX OPERATION”. x 42. Press "3" of Numeric keys. Then the followingmessage appears briefly to confirm yourselection.DEF3TX OPERATION? ▲OK=YES / or 1-7 ▼3. Press ◄ or ► key to select ON or OFF asdefault setting and press Yeskey. Yes7-17
