Using the Enhanced Utilities (2)7.2.3 Setting MANUAL DENSITYSet initial value of manual density level.1.Press the Utility key 2 times then the displayappears the message “COPY SETTING”. Utilityx 2COPY SETTING? ▲OK=YES / or 1-6 ▼3 MANUAL DENSITYLIGHT DARK◄ , ► & YESDEF32. Press "3" of Numeric keys. Then the followingmessage appears briefly to confirm yourselection.3. Press ◄ or ► key to select the desireddensity as default setting and press Yes key.YesCOPY SETTING? ▲OK=YES / or 1-6 ▼4. Press No/Clear key, back to the initial state.NoC7.2.4 Setting DENSITY(ADF)Adjust the copy image density level when optional Automatic Document Feeder isinstalled. This setting varies the gamma curve setting according to the type of originalsfrequently used.Setting Description DefaultMODE 1 When the standard original (text original) is used. *MODE 2 To give better reproduction of a faint original.Utility1.Press the Utility key 2 times then the displayappears the message “COPY SETTING”. x 2COPY SETTING? ▲OK=YES / or 1-6 ▼7-13
