Basic Fax Operation (1)6. Press the Yes key. YesTOKYO (2)SEARCH = YES (SEE=▼ ▲)* TOKYO1 ▲OK = START ▼The machine now search for the exact name or possible namesbeginning with the letters entered. Here you can find 2destinations searched.Press the ▲ or ▼ key to locate the party to whom youare going to transmit a document.Each press of the arrow key shows the next party nameon the Message DisplayStartOnce the correct destination is displayed, press the Start key.The machine now starts dialing the fax number and it starts feeding the document.Press the Stop key if you want to stop the transmission.* TX COMPLETE *TOKYO 1When the transmission is completed, a buzzer soundsand the message "TX COMPLETE" is shown for 2sec., indicating that the document has beensuccessfully transmitted to the other party.If you want to know the result of the transmission, check it either by using theConfirm function ¼P 8-1 or by printing the Activity Report. ¼P 9-113.2. How to Receive a Document - BasicsOverview of the Basic Reception ProcedureA document can be received in several different ways. This section explains how toreceive a document and directly print it on your fax machine without using thememory function. For the procedure using the memory function (memory reception),see "Printing the Document of Received by Memory RX mode" ¼P 6-23Before receiving a document, the following functions must be set.Reception Mode¼P 3-21This determines the mode in which your machine should be set to receive adocument from the other party.Print Mode¼P 3-20This determines the zoom ratio at which the document received from the otherparty is to be printed through your machine printer.3-19
