Using the Enhanced Utilities (2)*WRONG PAGE COUNT *11/125 DEFAULT TX*MEM. TX ADF TX◄ , ► & YESIf the pages are equal to the number youhave entered, it starts to dial and transmitthem, otherwise, the following messageappears, you should press "Stop" key, andback to step 1, transmit again.It means that you want to transmit 12 pages,but the machine only scanned 11 pages.7.3.4 Setting DEFAULT TXThis function is used to set the default TX mode of the fax unit. Two operations areavailable:Choices Available DescriptionMemory TXWhen set in this mode, documents are scanned into memoryfor transmission and dialing starts after the first page isscanned (Quick TX).ADF TX (DirectTransmission)When set in this mode, documents are scanned fortransmission after connection has been made to the receivingunit. (When the available memory is insufficient, please selectADF TX for a successful transmission)If line is not available, the message “LINE IS BUSY” will bedisplayed. The facsimile will retry based on the number ofredial attempts and intervals that were preset.Utility1. Press the Utility key 4 times then the displayappears the message “TX OPERATION”. x 42. Press "5" of Numeric keys. Then the followingmessage appears briefly to confirm yourselection.JKL5TX OPERATION? ▲OK=YES / or 1-7 ▼3. Press ◄ or ► key to select MEM. TX orADF TX as the default setting.7-19
