1305. Using On-Screen Menu[EDGE BLENDING]This function adjusts overlapping edges of images projected from each projector to uniform multi-screen images.Turns on or off the Edge Blending function. [MODE]Turning on [MODE] will make [TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL] available. (Default: OFF).Selects edge of top, bottom, left, and right of the screen to perform the Edge Blending function.[TOP/BOTTOM/LEFT/RIGHT]Turning on [CONTROL] will make [MARKER], [RANGE], and [POSITION] available. (→ page 49)CONTROL �������������� Turns on or off [TOP], [BOTTOM], [LEFT], and [RIGHT]�MARKER ���������������� Turns on or off a marker for the range and position adjustment� Turning on [MARKER] will display a magentamarker for [RANGE] and green marker for [POSITION]�RANGE ������������������� Adjusts the Edge Blending range (width)�POSITION �������������� Adjusts the Edge Blending start position�Adjusts the brightness level of 9-segmented portions. [BLACK LEVEL]9-segmented portions are [TOP-LEFT], [TOP-CENTER], [TOP-RIGHT], [CENTER-LEFT], [CENTER], [CENTER-RIGHT], [BOTTOM-LEFT], [BOTTOM-CENTER], and [BOTTOM-RIGHT]. (→ page 52)
