573. Convenient FeaturesNETWORK SETTINGS• SETTINGSWIRED or WIRELESSSETTING Set for wired LAN or for wireless LAN.APPLY Apply your settings to wired LAN or wireless LAN.DHCP ON Automatically assign IP address, subnet mask, and gateway to the projector from yourDHCP server.DHCP OFF Set IP address, subnet mask, and gateway to the projector assigned by your networkadministrator.IP ADDRESS Set your IP address of the network connected to the projector.SUBNET MASK Set your subnet mask number of the network connected to the projector.GATEWAY Set the default gateway of the network connected to the projector.WINS Set the IP address of your WINS server of the network connected to the projector when[DHCP] is turned on, this option is not available.AUTO DNS ON DHCP server will automatically assign IP address of DNS server connected to theprojector.AUTO DNS OFF Set your IP address of DNS server connected to the projector.Setting for WIRED LANPROFILE 1/PROFILE 2 Two settings can be set for wired LAN connection. Select PROFILE 1 or PROFILE 2.DISABLE Turn off wired LAN connectionSetting for WIRELESS LAN (the optional Wireless LAN Unit required for Europe, Australia, and Asian coun-tries)EASY CONNECTION Execute a wireless LAN using EASY CONNECTION.SIMPLE ACCES POINT Set the projector for simple access point.WPS Use WPS (Wi-Fi Protected Setup™) to set up the wireless LAN for the projector.NOTE: Use the projector’s menus to make WPS connections and change the WPSprofile settings.CHANNEL Select a channel. Available channels vary depending on the country and region. Whenyou select [INFRASTRUCTURE], make sure that the projector and your access pointare on the same channel; when you select [AD HOC], make sure that the projector andyour computer are on the same channel.PROFILE 1/PROFILE 2 Two settings can be set for wireless LAN connection. Select PROFILE 1 or PROFILE2.
