71. IntroductionTerminal Panel Features1. COMPUTER 1 IN/ Component Input Connector (Mini D-Sub 15 Pin) (→ page 13, 162, 167)2. COMPUTER 2 IN / Component Input Connector (Mini D-Sub 15 Pin) (→ page 162, 167)3. COMPUTER 3 IN/Component (R/Cr, G/Y, B/Cb, H, V) Connectors (BNC × 5) (→ page 162, 167)4. HDMI IN Connector (Type A) (→ page 163, 164, 168)5. DisplayPort IN Connector (DisplayPort 20P) (→ page 163)6. MONITOR OUT (COMP 1) Connector (Mini D-Sub 15 Pin) (→ page 165)7. VIDEO IN Connector (BNC) (→ page 166)8. S-VIDEO IN Connector (Mini DIN 4 Pin) (→ page 166)9. LAN Port (RJ-45) (→ page 169)10. USB Port (Type A) (→ page 75)11. PC CONTROL Port (D-Sub 9 Pin) (→ page 232)Use this port to connect a PC or control system. This enables you to control the projector using serial communica-tion protocol. If you are writing your own program, typical PC control codes are on page 232.12. REMOTE Connector (Stereo Mini)Use this connector for wired remote control of the projector using the NEC optional remote control.Connect the projector and optional remote control using a commercially available wired remote control cable.13. USB (LAN) Port (for optional Wireless LAN Unit) (→ page 170)14. Optional Slot (SLOT) (→ page 218)9 4 5 3 810 2 1 71311 12 14 6
