1556. Installation and ConnectionsProjecting Portrait ImagesThe projector can be used on its left side (when viewed from the front) to project portrait images.Caution on placing in portrait orientation• When using the projector on its left side, do not block the intake vents. Doing so will cause build-up heat insidethe projector.• When using the projector on its left side, attach a stand supporting the projector.• Lock the lens shift after completing lens shift adjustment.Specifications of stand for projecting portrait imagesFor designing a stand for projecting portrait images, consult your dealer.1. Allow 310 x 170 mm of space for the intake vents.2. Allow 130 mm or longer for opening the filter cover (intake vent).3. Use the 4 screws on the bottom of the projector.Location of 4 screws: 200 x 250 mmScrew: M4 x 8 mm• Design the stand so that it will not contact the rear feet of the projector.• Design the stand in such a way that it will not fall down easily.
