1738. User Supportware Projecting Your Computer’s Screen Image from the Projectorover a LAN (Image Express Utility Lite)Using Image Express Utility Lite allows you to send the computer’s screen image to the projector over a wired orwireless LAN.This section will show you an outline about how to connect the projector to a LAN and to use Image Express UtilityLite. For the operation of Image Express Utility Lite, see the help of Image Express Utility Lite.What you can do with Image Express Utility Lite• Image transmission• The screen of your computer can be sent to the projector via a wired or wireless network without a computer cable(VGA).• By using “EASY CONNECTION” function, the complicated network settings can be simplified and the computerwill automatically connect to the projector.• The screen of your computer can be sent to up to four projectors at the same time.• Geometric Correction Tool (GCT)See “❹ Projecting an Image from an Angle (Geometric Correction Tool in Image Express Utility Lite)”.Connect the projector to a LAN.Connect the projector to the LAN by following the instructions in “Connecting to a Wired LAN” (→ page 150), “Con-necting to a Wireless LAN (sold separately)” (→ page 151) and “9 Application Menus - NETWORK SETTINGS” (→page 120)Start Image Express Utility Lite.1. On Windows, click “Start” → “All programs” → “NEC Projector UserSupportware” → “Image Express UtilityLite” → “Image Express Utility Lite”.Image Express Utility Lite will start.The select window for network connection will be displayed2. Select Network and click “OK”.The select window for destination will show a list of connectable projectors.• When connecting the computer directly to the projector by one-to-one, “Easy Connection” is recommended.• When one or more networks for “EASY CONNECTION” are found, the “Easy Connection Selection Screen”window will be displayed.• To check for the network available for connected projectors, from the menu, select [INFO.] → [WIRELESSLAN] → [SSID].3. Select “Easy Connection” network you wish to connect, and click “Select”.The target selection window will be displayed.4. Place a check mark for projectors to be connected, and then click “Connect”.• When one or more projectors are displayed, from the menu on the projector, select [INFO.] → [WIRELESS LAN]→ [IP ADDRESS].
