293. Convenient FeaturesChecking Energy-Saving Effect [CARBON METER]This feature will show energy-saving effect in terms of CO2 emission reduction (kg) when the projector’s [ECO MODE]is set to [OFF], or [ON]. This feature is called as [CARBON METER].There are two messages: [TOTAL CARBON SAVINGS] and [CARBON SAVINGS-SESSION]. The [TOTAL CARBONSAVINGS] message shows the total amount of CO2 emission reduction from the time of shipment up to now. You cancheck the information on [USAGE TIME] from [INFO.] of the menu. (→ page 112)The [CARBON SAVINGS-SESSION] message shows the amount of CO2 emission reduction between the time ofchanging to ECO MODE immediately after the time of power-on and the time of power-off. The [CARBON SAVINGS-SESSION] message will be displayed in the [POWER OFF/ ARE YOU SURE ?] message at the time of power-off.TIP:• The formula as shown below is used to calculate the amount of CO2 emission reduction.Amount of CO2 emission reduction = (Power consumption in OFF for ECO MODE − Power consumption in ON for ECO MODE) ×CO2 conversion factor.* When the image is turned off with the AV-MUTE button the amount of CO2 emmission reduction will alsoincrease.* Calculation for amount of CO2 emission reduction is based on an OECD publication “CO2 Emissions from Fuel Combustion, 2008Edition”.• The [TOTAL CARBON SAVINGS] is calculated based on savings recorded in 15 minutes intervals.• This formula will not apply to the power consumption which is not affected by whether [ECO MODE] is turned on or off.
