39CHAPTER 1 OUTLINE (μPD78054 Subseries)1.4 Quality GradePart number Package Quality gradeμPD78052GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78052GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78053GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78053GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78054GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78054GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78P054GC-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) StandardμPD78P054GC-8BTNote 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78P054GK-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78P054KK-T 80-pin ceramic WQFN (14 × 14 mm) Not applicable(for function evalution)μPD78055GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78055GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78056GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78056GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78058GC-×××-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78058GK-×××-BE9 80-pin plastic TQFP (Fine pitch) (12 × 12 mm) StandardμPD78P058GC-8BT 80-pin plastic QFP (14 × 14 mm, Resin thickness: 1.4 mm) StandardμPD78P058KK-T 80-pin ceramic WQFN (14 × 14 mm) Not applicable(for function evalution)μPD78052GC(A)-×××-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) SpecialμPD78053GC(A)-×××-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) SpecialμPD78054GC(A)-×××-3B9 80-pin plastic QFP (14 × 14 mm, Resin thickness: 2.7 mm) SpecialNote Under developmentCautions 1. TheμPD78P054GC is available in two packages. For the package that can be supplied,consult NEC.2. TheμPD78054KK-T and 78P058KK-T should be used only for experiment or functionevaluation, because they are not intended for use in equipment that will be mass-producedand require high reliability.Remark ××× indicates ROM code suffix.Please refer to "Quality Grades on NEC Semiconductor Devices" (Document number C11531E) published by NECCorporation to know the specification of quality grade on the devices and its recommended applications.
