6-2 Solving System ProblemsYou may occasionally encounter a problem with the system. In mostcases, the problem is one that you can solve yourself.The system has a built-in program that automatically checks itscomponents when the system is powered on. If there is a problem, thesystem displays an error message. If this happens, follow any instructionson the screen.If screen messages do not help or an error message does not appear, referto the information in this chapter to help determine and solve the problem.Solutions to Common ProblemsSee the following sections to match your problem area and view thepossible causes and solutions.When trying to solve problems, you should note what the system wasdoing when the problem occurred and what you attempted to do to correctthe problem. This information is useful if you request assistance.System ProblemsCheck the following list to match your problem and see the possible causeand solution.! No power and power lamp not lit.Check that system power is on.Check that the AC adapter and power cord are connected together.Check that AC adapter power cord is plugged into the system DCpower socket on the system unit and into a live, properly grounded ACpower outlet or surge protector.Check the outlet or surge protector by plugging in a lamp.! Non-System Disk error message displays when the system isstarted.You have a diskette in the diskette drive, and the diskette drive is setbefore the hard drive in boot order. Remove the diskette from drive Aand restart the system.
