3-26 Configuring the SystemDo not select and install drivers for any hardwarethat is not currently installed on the system. Doing so can damage theoperating system.Launch the NEC Application and Driver CD as follows:! In systems running the Windows NT operating system, insert the NECApplication and Driver CD after the system reboots and you havechosen the Windows NT Workstation Version 4.00 operating system.Be sure to insert the CD before Windows NT actually completes itsboot and displays the NT logon screen.Note Install the optional software located on the NEC Application andDriver CD after you first logon to Windows NT.! For systems running the Windows 98 or Windows 2000 operatingsystem, insert the NEC Application and Driver CD after the systemreboots.The CD autorun feature loads the NEC Application and DriverInstallation program.The Application and Driver Installation Utility dialog box appears. See“Installing Software” for further instructions.Installing SoftwareThe Application and Driver Installation Utility dialog box consists of thefollowing components.! Selection Tabs — Located just below the title bar, each tab representsa software category. The selection tabs include applications, drivers,utilities, Internet browsers, and the online NEC INFO Center.! Description — Located in the bottom portion of the dialog box, thetext describes the selected or highlighted software category orapplication, driver, etc.! Install — Clicking the Install button installs the selected software.! Exit — Clicking the Exit button closes the Application and DriverInstallation Utility dialog box.
