PM 2000 Series Release Notes A-5See the documentation in the Userinfo folder for information about usingPartitionMagic, BootMagic™, and the recovery diskette program. Reading theUserinfo files requires Adobe® Acrobat ® Reader. Adobe Acrobat Reader comeson the NEC Application and Driver CD.Note: If you are installing BootMagic in a system withthe Windows NT operating system, see the next section,“Installing BootMagic in a System with Windows NT.”Installing BootMagic in a System with Windows NTBootMagic™ is a utility included in the PowerQuest PartitionMagic™ software.See the previous section, “Installing PartitionMagic,” for general installationinformation.If you have a Windows NT operating system, use the information in thefollowing section to correctly configure BootMagic.If you already installed BootMagic and the configuration resulted in an errormessage, see “Correcting the BootMagic Configuration.”Configuring BootMagicIf you have a system with the Windows NT operating system, use the followingprocedure to correctly configure BootMagic.1. Follow the instructions in the PartitionMagic Userinfo folder to installBootMagic. When the “BootMagic Configuration” box appears at the end ofthe installation, continue to the next step.2. Configure BootMagic.! If you want to use BootMagic:Click the ENABLE BOOTMAGIC button. The BootMagic menu appearsduring the next bootup sequence and lets you select Windows NT as theoperating system.! If you do not want to use BootMagic:Do not select the ENABLE BOOTMAGIC button. The BootMagic menudoes not appear at bootup.3. Select SAVE/EXIT in the BootMagic Configuration box to complete theconfiguration process. Either choice, to enable BootMagic or to not enableBootMagic, requires the SAVE/EXIT selection.
