2-46 System Configuration6. Edit the properties.7. Click OK to return to the Network screen.8. Click Close to return to the Windows screen.NEC Configuration Change NotificationNEC Configuration Change Notification is an application that runs as Windowsstarts. It works with the LANDesk application and DMI (Desktop ManagementInterface) software to determine if there has been a change in the processor,main memory, or hard drive since the last startup. A message appears on thescreen when a change is detected.Install NEC Configuration Change Notification from the NEC Application andDriver CD. For installation information, see “Installing ToolTelligent Utilities.”NEC Auto Backup UtilityThe NEC Auto Backup utility works with LANDesk Client Manager andCheyenne Backup to detect predicted hard drive failures and to automaticallyback up the data from the failing drive. The utility only works with SMARThard drives and it requires both LANDesk Client Manager and CheyenneBackup to function.The Auto Backup utility runs from the Startup group on the Windows Startmenu. The utility has some configuration options that are accessible through thesystem tray icon. The NEC Tools group on the Start menu includes a Read Mefile containing recent information about the utility as well as access to a Helpdocument.Cheyenne Backup configuration determines the exact nature of the backup thatwill be performed automatically. See the online Help for Cheyenne BackupConfiguration for information about available options.Install the NEC Auto Backup Utility from the NEC Application and Driver CD.For installation information, see “Installing ToolTelligent Utilities.”Intel Processor Serial Number Control UtilityThe Intel Processor Serial Number Control utility is a Windows program thatenables or disables the reading of the Pentium III processor serial number bysoftware. This function controls which software programs or websites havepermission to read the processor serial number. When installed, the utility runsautomatically each time the system powers on.The utility places an icon in the Windows system tray. The icon provides avisual status of the processor serial number. You have the option of hiding thesystem tray icon. You can disable the processor serial number at any time.However, enabling the serial number requires restarting the system.