NEC POWERMATE 2000 Service And Reference Manual

Also see for POWERMATE 2000: Service and reference manual Service and reference manual

Contents

Disassembly and Reassembly 3-9CD-ROM Drive RemovalRemove the CD-ROM drive as follows.1. Remove the system unit bottom cover (see “Bottom Cover Removal” earlierin this section).2. Disconnect the CD-ROM drive interface cable from its connector on thedrive.! Release the cable retainer on the drive connector by gently pushing theends of the retainer away from the connector.! Carefully pull the cable out of the drive connector.Removing the CD-ROM DriveA – CD-ROM Drive D – Drive ConnectorB – Cable Retainer E – Screws (4)C – Interface Cable F – Support Plate3. Remove the four screws securing the drive to the support plate.4. Remove the CD-ROM drive from the system unit.5. As required, remove the drive interface connector board from the drive byremoving one screw and unplugging the connector board from its connectoron the drive.