NEC POWERMATE 4100M Service Manual

Contents

5-14 Desktop RepairOptional 5 1/4-Inch Device RemovalRemove an optional 5 1/4-inch device from the 5 1/4-inch device cage per Figure Section 5-19, and the following steps.1. Remove the top cover, front panel, and 3 1/2-inch drive bracket as previously de-scribed.2. Unplug all signal and power cables from the device(s) in the 5 1/4-inch devicecage (see Figure Section 5-19). The CD ROM reader also requires the audio cableto be disconnected from the device.3. Remove the four device screws; two from each side of the 5 1/4-inch device cage(see Figure Section 5-19).4. Remove the device out of the 5 1/4-inch device cage from the front of the systemunit.NOTE: When reinstalling the 5 1/4-inch device,note that all power cables are keyed to fit only inthe correct position. The red edge of the diskettedrive signal cable is positioned as shown.Figure Section 5-19 5 1/4-Inch Device Screws2 of 4Device ScrewsPower CableSignal CableDevice Cage