Section 6Minitower RepairDISASSEMBLY AND REASSEMBLYThis section contains step-by-step disassembly procedures for the minitower systems. Thehard disk drive, and 3 1/2-inch diskette drive are installed and included in these disassemblyprocedures. Reassembly is the reverse of disassembly. Each procedure is supported by asimplified disassembly illustration to facilitate removal. The detailed exploded-view diagramand parts lists for the desktop systems are shown later in this section.A Phillips-head screwdriver is the only required tool. For complete disassembly of the sys-tem unit, follow the disassembly order listed in Table Section 6-1. To reassemble, follow thetable in reverse order.Individual removal procedures do not require the total disassembly of the computer. Eachof the following subsections lists the parts that must be removed before beginning the re-moval procedure. To reassemble, follow the procedure in reverse order.Table Section 6-1 PowerMate Minitower Disassembly SequenceSequence Part See Page1 Top cover 6-32 Expansion board(s) 6-43 ISA/VL-Bus backboard 6-64 Front panel assembly 6-75 Speaker assembly 6-96 Secondary cache and SIMM memory 6-107 3 1/2-inch diskette drive 6-118 3 1/2-inch hard disk drive 6-139 5 1/4-inch device cage 6-1610 5 1/4-inch device 6-1511 Power supply 6-1712 System board 6-1813 Battery 6-20
