3-42 OptionsRear Control PanelThe rear control panel on the NEC SVGA Monitor is shown in Figure Section 3-43. Expla-nations of the individual controls follow the figure. The tilt/swivel feature allows proper po-sitioning of the monitor.Figure Section 3-43 NEC SVGA Monitor Rear Control Paneln Vertical Center (Vertical Position) Control – Turn this knob to adjust the on-screen image vertical position. Turn the knob clockwise to raise the screen image,counterclockwise to lower the screen image.n Horizontal Phase (Horizontal Position) Control – Turn this knob to adjust the on-screen image horizontal position. Turn the knob clockwise to move the screen im-age position to the right, counterclockwise to move the screen image position tothe left.n Horizontal Hold 3 – If the screen flickers, use this control to steady the screen.n Tilt/Swivel Control – The tilt/swivel feature allows the user to tilt the screen up ordown, and move it from side to side, 45 degrees to the right or left. The user canreposition the monitor up to an angle of –5 degrees forward and +15 degreesbackwards.Vertical CenterControlControlVertical CenterHold 3Horizontal Horizontal PhaseControl
