NEC PowerMate 5100 Series Release Notes A-3 In Windows 95 and Windows 98 systems, press Start, highlightPrograms, scroll over and highlight Intel LANDesk Setup, and selectClient LDCM Setup. (In Windows NT systems, the installation startsautomatically.) After LDCM installation completes, remove the NEC Select Install CD. Reboot the system.Note: After installing LANDesk Client Manager for thefirst time, a non-critical error message may appear after thesystem reboots. Simply reboot the system again to clear theerror message.3. Read the following information to ensure that you properly set up yoursystem configuration. Do not install both the NEC SNMP Agent and LANDesk Client Manageron the same computer. The two applications are incompatible, and neithercan be removed using the uninstall utility. To remove them, a full restoremust be performed after which all applications must be reinstalled.! CAUTIONDo not install both the NEC SNMP Agent and LANDeskClient Manager on the same computer. The NEC SNMP Agent and the NEC WebTelligent software are eachinstalled using a Setup.exe program launched from a subdirectory on theNEC Select Install CD. These applications can be installed without regardto the order in which other applications are installed. Applications other than LANDesk Client Manager, Internet Explorer, theNEC SNMP Agent, or the NEC WebTelligent software can be installedduring the same Select Install session or, if installed in different sessions,in any order once Internet Explorer and LANDesk Client Manager areinstalled. Install the NEC Help Center after installing Microsoft Internet Explorer4.01 on the system. The Help Center cannot run without MicrosoftInternet Explorer 4.01 and it cannot be installed from the NEC SelectInstall CD unless Internet Explorer 4.01 has already been installed.Note: Install the NEC Help Centerafter installingMicrosoft Internet Explorer 4.01 on the system. The HelpCenter cannot run without IE 4.01 and it cannot be installedunless IE 4.01 has already been installed.
