NEC POWERMATE VE - SERVICE MANUAL 08-1996 Service Manual

Also see for PowerMate V100e: Service manual

Contents

NEC POWERMATE VE - SERVICE MANUAL 08-1996 Service Manual Manual pdf 77 page image

Option Installation 3-21Figure 3-19 Connecting 1.2-MB Diskette Drive CablesStorage Device InstallationThe following subsections describe how to install 3 1/2-inch and 5 1/4-inch drives. Theinstallation procedures include: removing the 3 1/2-inch drive bracket installing a 3 1/2-inch drive removing the front panel installing a 5 1/4-inch device replacing the front panel replacing the 3 1/2-inch drive bracket.Removing the 3 1/2-Inch Drive BracketThe 3 1/2-inch drive bracket containing the diskette drive must be removed before installingany 3 1/2-inch and 5 1/4-inch devices. Remove the bracket as follows.1. Remove the desktop system cover as previously described.2. Remove the screw securing the drive bracket to the chassis (see Figure 3-20).3. Slide the bracket to the rear of the chassis to release it from the three bracket tabs.4. Carefully lift the drive bracket up and place it on top of the power supply.Red EdgeDiskette DriveSignal CableConnectorPowerCable