1436. Installation and Connections❷ Making ConnectionsA computer cable, BNC cable (5-core type), HDMI cable, or a DisplayPort cable can be used to connect to a computer.The connection cable is not enclosed with the projector. Please get ready a suitable cable for the connection.Analog RGB signal connection• Connect the computer cable to the display output terminal (mini D-sub 15 pin) on the computer and the COMPUTERIN terminal on the projector. Please use a computer cable attached with a ferrite core.• When connecting the display output terminal (mini D-sub 15 pin) on the computer to the BNC input terminal, usea conversion cable to convert the BNC cable (5 core) to a mini D-sub 15 pin cable.• Select the source name for its appropriate input terminal after turning on the projector.Input terminal SOURCE button on the projectorcabinet Button on the remote controlCOMPUTER IN COMPUTER COMPUTER 1BNC BNC COMPUTER 2COMPUTER INBNC INComputer cable (sold commercially)RGB - to - BNC cable(not supplied)NOTE: Please check the operating manual ofthe computer as the name, position and direc-tion of the terminal may differ depending onthe computer.
