4. Multi-Screen Projection73Preparation:• Turn on the projector and display a signal.• When performing settings or adjustments using the remote control, enable the [CONTROL ID] so as not to activatethe other projectors. (→ page 125)Setting the overlap of projection screens① Enable [EDGE BLENDING].1. Press the MENU button.The menu will be displayed.2. Select [EDGE BLENDING].The [EDGE BLENDING] screen will be displayed. Align the cursor with [MODE] and then press the ENTER button.The mode screen will be displayed.3. Select [MODE] → [ON] and press the ENTER button.This enables the Edge Blending function. The following menu items are available:[TOP], [BOTTOM], [LEFT], [RIGHT], and [BLACK LEVEL]4. Select [RIGHT] for Projector A and [LEFT] for Projector B.Press the ENTER button.The following items are available:[CONTROL], [MARKER], [RANGE], and [POSITION]
