1536. Installation and ConnectionsConnecting to a HDBaseT transmission device (sold commercially)HDBaseT is a connection standard for home appliances that is established by the HDBaseT Alliance.Use a LAN cable sold commercially to connect the Ethernet / HDBaseT port of the projector (RJ-45) to a HDBaseTtransmission device sold commercially.The Ethernet/HDBaseT port of the projector supports HDMI signals (HDCP) from transmission devices, control signalsfrom external devices (serial, LAN) and remote control signals (IR commands).Connection exampleEthernet/HDBaseTComputer (for control use)Computer (for output use)Example of a transmission deviceRemote controlHDMI output video deviceNOTE:• Please use a shielded twisted pair (STP) cable of Category 5e or higher for the LAN cable (sold commercially).• The maximum transmission distance over the LAN cable is 100 m. (the maximum distance is 70 m for a 4K signal)• Please do not use other transmission equipment between the projector and transmission equipment. The picture quality may bedeteriorated as a result.• This projector is not guaranteed to work with all HDBaseT transmission devices sold commercially.
