41. IntroductionVideos• Wide range of input/output terminals (HDMI, DisplayPort, BNC, HDBaseT, etc.) and built-in monaural speakerThe projector is equipped with a variety of input/output terminals: HDMI, DisplayPort, BNC (5-core), computer(analog), HDBaseT, etc.The projector’s HDMI input/output terminals and DisplayPort input terminal support HDCP.HDBaseT, promoted and advanced by the HDBaseT Alliance, is a consumer electronic (CE) and commercial con-nectivity technology.• Slot for optional boardThis projector has a slot for optional boards (sold separately).• Simultaneous display of 2 images (PIP/PICTURE BY PICTURE)Two images can be projected simultaneously with a single projector.There are two types of layouts for the two images: “picture-in-picture” (PIP) in which a sub-picture is displayedon the main picture, and “picture-by-picture” (PICTURE BY PICTURE) in which the main and sub pictures aredisplayed next to each other.• Multi-screen projection using multiple projectorsThis projector is equipped with multiple HDMI input & output terminals that can connect multiple projectors in adaisy chain. By dividing and projecting high resolution image on each projector, high quality image can be realized.Furthermore, the boundaries of the screens are smoothed using an edge blending function.• Supports HDMI 3D formatThis projector can be used to watch videos in 3D using commercially-available active shutter-type 3D eyewearand 3D emitters that support Xpand 3D.Network• Convenient utility software (User Supportware) provided as standardThe three utility software stored in the enclosed NEC Projector CD-ROM (Virtual Remote Tool, PC Control UtilityPro 4 (for Windows ) and PC Control Utility Pro 5 (for Mac OS )) can be used.• CRESTRON ROOMVIEW compatibleThis projector supports CRESTRON ROOMVIEW,allowing multiple devices connected to the network to be man-aged from a computer or controller.Energy-saving• Energy-saving design with a standby power consumption of 0.27 watts or underWhen the on-screen menu’s standby mode is set to “NORMAL”, the power consumption in the standby mode is0.27 watts or under.0.18 watts with power voltage AC100V-130V and 0.27 watts with power voltage AC200V-240V.• “LIGHT MODE” for low power consumption and “Carbon Meter” displayThe projector is equipped with an “LIGHT MODE” for reducing power consumption during use. Furthermore, thepower-saving effect when the LIGHT MODE is set is converted into the amount of reductions of CO2 emissionsand this is indicated on the confirmation message displayed when the power is turned off and at “Information” onthe on-screen menu (CARBON METER).
