NEC PlasmaSync 42XC10 User Manual

Also see for PlasmaSync 60XC10: Brochure & specs Supplementary guide Brochure Brochure Brochure

NEC PlasmaSync 42XC10 User Manual Manual pdf 18 page image

EnglishEnglish-15On-Screen Display (OSD)Main Menu Sub Menu Sub Menu2 Explanation Default ResetPICTURE PICTURE MEMORY Store picture menu settings and input terminal information. Thememory number is 1-6.The "PICTURE MEMORY" screen appears when the SET button ispressed on the "PICTURE MEMORY" MENU.OFF YESCONTRAST Adjusts the image brightness in relationship to the white level.Press + or - to adjust.50 YESBRIGHTNESS Adjusts the image brightness in relationship to the background.Press + or - to adjust.50 YESSHARPNESS Adjusts the crispness of the image. Press + or - to adjust. 50 YESCOLOR Adjusts the color depth of the screen. Press + or - to adjust. 50 YESTINT Adjusts the tint of the screen. Press + or - to adjust. 50 YESNR Adjusts the amount of noise reduction. Press + or - to adjust. OFF YESCOLOR TEMP. Adjusts the color temperature of the entire screen. A lowcolor temperature will make the screen reddish. A high colortemperature will make the screen bluish.MIDDLE YESWHITE BALANCE. GAIN RED The "WHITE BALANCE" appears when the SET button is pressedon the "COLOR TEMP." OSD menu.GAIN RED/GREEN/BLUE: Adjusts the white level of the whitebalance.50 YESGAIN GREEN 50 YESGAIN BLUE 50 YESRESET Resets the factory default settings. Select "ON", then press theSET button to reset.OFF YESFILM MODE Selects Film mode. ON YESPICTURE MODE Selects picture mode, [BRIGHT], [STANDARD], [CINEMA1],[CINEMA2], [DEFAULT].STANDARD: For watching in a bright room.CINEMA1, 2: For watching in a dark room, especially good formovies.BRIGHT: Brighter picture than STANDARD.DEFAULT: Restores factory default settings.STANDARD YESGAMMAAvailable only whenthe Advanced OSDfunction in theFUNCTION menu isenabled.Select a display gamma for best picture quality.2.1, 2.2, 2.3, 2.4: The picture becomes darker as the numberincreases.S: Special gamma for certain types of movies. Raises the darkparts and lowers the light parts of the image. (S-Curve)These values are approximate.2.2 YESSET UP LEVELAvailable only whenthe Advanced OSDfunction in theFUNCTION menu isenabled.Adjusts the video black level.VIDEO signal input only.0% YESCOLOR CONTROLAvailable only whenthe Advanced OSDfunction in theFUNCTION menu isenabled.RED Adjusts the levels of the Red, Green, Blue, Yellow, Magenta andCyan.VIDEO and DVD/HD 1/2 input only.50 YESGREEN 50 YESBLUE 50 YESYELLOW 50 YESMAGENTA 50 YESCYAN 50 YESRESET Resets the factory default settings. Select "ON", then press theSET button to reset.OFF YES