NEC PlasmaSync 42XC10 User Manual

Also see for PlasmaSync 60XC10: Brochure & specs Supplementary guide Brochure Brochure Brochure

NEC PlasmaSync 42XC10 User Manual Manual pdf 22 page image

EnglishEnglish-19Picture Size Using ComputerSignalsTo expand a 4:3 image to fill the entire screen, switch to thewidescreen mode.While viewing videos or digital video discs, perform thefollowing actions:1. Press the SIZE button on the remote control.2. To switch the screen sizes, press the SIZE button againwithin 3 seconds. The available sizes are NORMAL, FULL,and ZOOM.If an enhanced split-screen is displayed, the available sizesare NORMAL and FULL.NORMAL (4:3 or SXGA 5:4)Images are displayed normally.FULLHorizontally expands anamorphic signals to display thecorrect linearity.Normal (4:3) images are horizontally expanded to fill theentire screen.ZOOMVertically and horizontally expands the picture, whilemaintaining the correct aspect ratio.Information:Supported resolutions: For further information on thedisplay output of the various VESA signal standardssupported by the unit, see pages 31 - 36.When 1360 dot x 768 line wide XGA signals with a verticalfrequency of 60 Hz and a horizontal frequency of 47.7 kHzare input:1. Select an appropriate setting for the RGB SELECT mode.2. Refer to the Resolutions Supported section of ModelInformation on pages 31 - 36.NOTE: Do not display 4:3 content in NORMAL modefor extended periods of time to avoid imageshadowing, ghosting, or burn-in.Operation - continued