NEC PlasmaSync 42XC10 User Manual

Also see for PlasmaSync 60XC10: Brochure & specs Supplementary guide Brochure Brochure Brochure

NEC PlasmaSync 42XC10 User Manual Manual pdf 25 page image

English-22Operation - continuedPicture Settings MenuStoring picture settingsThis function stores the current input signal and PICTUREmenu settings in memory in order to recall these settings ifnecessary. Up to six different settings can be stored.Notes of up to 15 characters long can also be stored alongwith each setting.Example: Storing picture settings at MEMORY1On the “PICTURE MEMORY” function under the“PICTURE” menu, select “MEMORY1” and press the SETbutton. The “PICTURE MEMORY” screen appears.PICTURE MEMORYOFF: Picture memory not used.MEMORY1 TO 6: Choose the desired memory slot to set.There are 6 to choose from, independent of inputs.SETTING THE MEMORYUse the p and q buttons to select the desired memory slot,from MEMORY1 to MEMORY6.Use the t and u buttons to select “SET”, then press the SETbutton.If necessary, input a note.RESETTING THE MEMORYUse the p and q buttons to select the desired memory slot,from MEMORY1 to MEMORY6, then use the t and ubuttons to select “RESET”, and press the SET button.The memory is cleared, and “—” is displayed in the “INPUT”,“SIGNAL” and “NOTE” columns.INPUTTING NOTESUse the t and u buttons to select “NOTE”, then press theSET button.Use the p and q button to select the character.Use the t and u buttons to move the cursor.Use the SET button to delete the character at the cursorposition.When you have finished inputting the note, press the EXITbutton.