Setup and Operation 2-23Table Section 2-5 Boot ParametersParameters Options DescriptionFloppy check Enabled (default)DisabledSeeks diskette drives during bootup. Disablingspeeds boot time.Summary screen Enabled (default)DisabledDescribes system configuration at the end ofbootup.Last Boot Fail 3 (default)User selectablesettingsDisabledSets number of times the system can attempt toboot the system. If the system fails to boot on theset number of tries, the “Previous Boot Incomplete”message appears and the system boots withdefault settings.The default setting, 3, allows three tries to boot thesystem. On the fourth try, the “Previous BootIncomplete “ message appears.NumlockSelect “Numlock” directly from the Main Menu summary window to display the KeyboardFeatures menu.Use the legend keys to make the selections and exit to the Main Menu. Use Table Section 2-6 toconfigure the keyboard parameters. Select “NumLock” directly from the Main Menu summarywindow to display the Keyboard Features menu.Table Section 2-6 Numlock ParametersParameters Options DescriptionNumlock Auto (default)OnOffOn or Off turns NumLock on or off at bootup. Autoturns NumLock on if it finds a numeric key pad.Keyboard auto-repeat rateFast (default)MediumSlowSets the delay time after the key is held downand before it begins to repeat the keystroke.Keyboard auto-repeat delay1/4 sec1/2 sec (default)3/4 sec1 secSets the delay time after the key is held downand before it begins to repeat the keystroke.Key Click EnabledDisabled (default)Turns audible key click on or off.
