3-8 Options3. Install the expansion board into an expansion slot connector (and the guide rail if install-ing a full-size expansion board).If installing a PCI board in the shared slot, install the board component side down in thetop PCI connector.If installing an ISA board in the shared slot, install the board component side up in theISA connector under the PCI connector.4. Reinstall the expansion slot screw to secure the expansion board.5. Connect any expansion board cables.6. Replace the top cover and bottom access cover.Expansion Board TroubleshootingIf a fault occurs at power-on, verify that the expansion board installation was performed cor-rectly. One beep indicates that the computer has completed its power-on self-test. Ifintermittent beeping occurs, turn off the computer and try again. If the beeping persists, see“Troubleshooting” in Section 4. Table Section 3-1 summarizes problems that may develop afterinstalling an expansion board and lists in sequential order suggested corrective actions.
