2-30 Setup and OperationThe CMOS values have been corrupted or modified incorrectly, perhaps by an application pro-gram that changes data stored in CMOS.Press F1 to resume the boot or F2 to run Setup with the ROM default values already loaded intothe menus. Other changes can be made before saving the values to NVRAM.Load Previous ValuesDuring a Setup session, if a mistake has been made and has not yet been saved to NVRAM, thepreviously saved NVRAM values can be restored.Selecting Load Previous Values on the Exit menu updates all the selections and displays this mes-sage:CMOS values have been loaded!Press to continueSave ChangesSave Changes saves all the selections without exiting Setup. Other menus selections can be re-viewed or changed.BIOS UPDATE UTILITYThe NEC Bulletin Board Service (BBS) provides information about system software and hard-ware. Use the NEC BBS to obtain the latest version of the BIOS Update utility (BUU) and forVGA video drivers.To log onto the NEC BBS, follow these steps:NOTE: First time users must answer a new userquestionnaire.1. From the Windows Program Manager, select Accessories and double click onTerminal.2. From the Settings menu, select Communications and check that the settings match thefollowing BBS parameters:n Baud rate: 2400 bpsn Parity: nonen Data bits: 8n Stop bits: 1
