72 SuperScript 4400 — Maintenance GuideRunning MAP and Selecting a 4400Na. In Windows 95/98 or Windows NT 4.0, press the Start button. Select MAP from the program group youspecified during installation.When MAP starts, a list of all available units on the network is displayed by unit IP address or serial number.The unit listing will be divided by TCP/IP units and IPX/SPX units. See the illustration below.note: If a unit is enabled for both IP and IPX, it will appear in both lists.b. Click on a unit in the list to display its Network Administration Page.The Network Administration Page options are explained beginning on page 75.An example using MAP and the Network Administration Page to configure the printer for NetWare 4.x isshown on page 85.Management Access Program 3.20[Refresh] [Help]Units supporting TCP/IPhttp://131.241.45.61/NEC_991142 NEC SuperScript 4400 Ethernet Cardhttp://131.241.45.203/NEC_991149 NEC SuperScript 4400 Ethernet Cardhttp://131.241.45.64/NEC_991151 NEC SuperScript 4400 Ethernet Cardhttp://131.241.45.83/NEC_991650 Print Server Cardhttp://131.241.45.191/NEC_991653 Print Server Cardhttp://131.241.45.189/NEC_991655 NEC SuperScript 4400 Ethernet Cardhttp://131.241.45.127/NEC_999999 Print Server CardUnits supporting IPX/SPXNEC 991142 NEC SS 4400NEC 991149 NEC SS 4400NEC 991151 NEC SS 4400NEC 991650 NEC SS 4400NEC 991653 NEC SS 4400NEC 991655 NEC SS 4400NEC 999999 NEC SS 4400The MAP lists the 4400N printers on your network.Select one to display its Network Administration Page.
