Issue 1.0 UNIVERGE SV81002 - 244 Program 20 : System Option SetupDescriptionUse Program 20-25 : ISDN Options to define the ISDN system options.Program 20 : System Option Setup20-25 : ISDN OptionsLevel:INInput DataItemNo. Item Input Data Default01 Send the Release Message After Subscriber HangsUp 0 = Service Off1 = Service On102 Progress Indicate Information Element Detect 0 = Service Off1 = Service On103 Bearer Capability Select from SLT Outgoing 0 = 3.1KHz Audio1 = Speech004 Send DT until user dials first digit (Local Dial Tone)With Overlap Sending Mode, if the network side stopsdial tone when CLI is included in the SETUP message,the system sends dial tone until the user dials the firstdigit instead of the network.0 = Service Off1 = Service On005 T305 Timer Start After Sending DisconnectMessage 0 = Service Off1 = Service On106 Call Proceeding Send Mode 0 = Service Off1 = Service On107 Local Busy Tone Mode Set When DisconnectMessage Received 0 = Local Busy ToneOff1 = Busy Tone fromNT (network side)008 Use of Lower Layer Compatibility (LLC)This Program must be set to (0 = Disable) forInternational Dialing when using Calling NumberPresentation (CPN) from station.0 = Disable (Off)1 = Enable (On)009 High Layer Compatibility (HLC) Sending 0 = Disable (Off)1 = Enable (On)010 S-Point Terminal Seizes Analog Trunk 0 = Disable (Off)1 = Enable (On)1Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
