UNIVERGE SV8100 Issue 1.0Programming Manual 2 - 39DescriptionUse Program 10-24 : Daylight Savings Setup to set the options for daylightsavings. As the telephone system is used globally, these settings define when thesystem should automatically adjust for daylight savings as it applies to the region inwhich the system is installed.Program 10 : System Configuration Setup10-24 : Daylight Savings SetupLevel:INInput DataItemNo. Item Input Data Default01 Daylight Savings ModeEnable (1) or disable (0) the system ability toadjust the time for daylight savings/standardtime.0 = Disable1 = Enable102 Time for Daylight SavingsEnter the time of day when the system shouldadjust for daylight savings time.00:00~23:59 02:0003 Start Month (Summer Time)Enter the month when the system shouldadjust the time for daylight savings time(01~12).1~12(Jan = 1, 2 = Feb, etc.)304 Start of WeekEnter the week of the month when the systemshould adjust the time for daylight savingstime. The week will start on the day listed in10-24-05.0 = Last Week of Month0~5205 Start of Week DayEnter the day of the week when the systemshould adjust the time for daylight savings time(01 = Sunday, 02 = Monday, etc.).1~7(Sun = 1, Mon = 2, etc.)106 End of MonthEnter the month when the system shouldadjust the time for standard time (01~12).1~12(Jan = 1, 2 = Feb, etc.)1107 End of WeekEnter the week of the month when the systemshould adjust the time for standard time.The week will start on the Day listed in10-24-08.0 = Last Week of Month0~51Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
