Issue 1.0 UNIVERGE SV81002 - 700 Program 90 : Maintenance ProgramDescription(This program is available only via telephone programming and not through PCProgramming).Use Program 90-05 : Slot Control to reset or delete (uninstall) blades (slots 1~24).Delete allows you to completely uninstall the blade. You should do this if you want toremove a blade and plug it into a different slot and still retain the port assignments. Ifa different type of interface blade is being installed in a slot previously used (e.g.,changing from a LCA to an DLCA blade), the slot should be deleted (option 1) firstbefore installing the new interface blade.Reset allows you to send a reset code.ConditionsP When you delete or reset a blade, you must first remove it from its slot then runProgram 90-05. When reusing the slot for another blade, you must plug the bladein or reset the system before the system can use the slot again.P When you delete or reset a blade, all related programming in Program 10-03-01 isset back to default.Feature Cross ReferenceNoneProgram 90 : Maintenance Program90-05 : Slot ControlLevel:INInput DataMenu Number 1 = Delete2 = Reset3 = Set Busy Out4 = Reset Busy OutItemNo. Item Input Data01 Slot Control Slot Number (1~24)Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
