UNIVERGE SV8100 Issue 1.0Programming Manual 2 - 311DescriptionUse Program 22-15 : VRS Delayed Message for Department Group to define foreach Department (Extension) Group the timers, VRS message number and tone kindfor VRS Delayed Message. There are 64 available Department Groups.Program 22 : Incoming Call Setup22-15 : VRS Delayed Message for Department GroupLevel:INInput DataExtension Group Number 01~64ItemNo. Item Input Data Default01 1st Delayed Message Start TimeTime before the VRS Delay Message isplayed for Department Group.0~64800 (sec) 002 1st Delayed Message NumberVRS message that is used for the 1stDelayed Message.0~1010 = No Message101 = Fixed Message003 1st Delayed Message Sending CountThis is the number of times the 1st DelayMessage is played. If set to 0, the 1stDelay Message is not played.0~255 (time) 004 2nd Delayed Message NumberVRS message that is used for the 2ndDelayed Message.0~1010 = No Message101 = Fixed Message005 2nd Delayed Message Sending CountThis is the number of times the 2nd DelayMessage is played. If set to 0, the 2ndDelay Message is not played.0~255 (time) 006 Tone Kind at Message IntervalWhat is heard between the DelayMessage.0 = Ring Back Tone1 = MOH Tone2 = BGM Source007 Disconnect Time After the End of VRSDelayed MessageTime, after all 2nd Delay Messages areplayed, before the caller is disconnected.0 = No Disconnect1~64800 (sec)60Digitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
