Issue 1.0 UNIVERGE SV81002 - 298 Program 22 : Incoming Call SetupDescriptionUse Program 22-09 : DID Basic Data Setup to define the basic setting of Dial-Inincoming calls for each trunk group.Program 22 : Incoming Call Setup22-09 : DID Basic Data SetupLevel:INInput DataTrunk Group Number 001~100ItemNo. Item Input Data Default01 Expected Number of DigitsEnter the number of digits the tableexpects to receive from the telco. Use thisprogram to make the system compatiblewith 3- and 4-digit DID service.If ISDN trunks, we analyze the last digitsthat are set here. If it is T-1 or analog DID,it analyzes the first digits that are assignedhere.1~8 402 Received Vacant Number OperationUse this option to enable or disableVacant Number Intercept.0 = Disconnect (Cut)1 = Transfer (Refer toProgram 22-12 : DIDIntercept Ring Group onpage 2-306.)003 Sub-Addressing Mode 0 = Extension # Specify(Intercom)1 = DID Conversion Table004 DID Receiving Mode for ISDN 0 = Enbloc Receiving1 = Overlap Receiving005 Local Code Digits(Only Overlap Receiving Mode)0~15 (0 = No Local Code) 006 Local Code(Only Overlap Receiving Mode)Dial (maximum 16 digits) No Setting07 Pilot Code(Only Overlap Receiving Mode)Dial (1 digit: 0~9) No SettingDigitcom Canada Inc. Need Support? Call 1-866-667-8357 Visit us at: www.digitcom.ca
