Setup and Operation 2-25ExitLets exit Setup with the following options: Save and ExitSaves changes, but does not reboot. The changes are effective only after the nextsystem startup. Save and RebootSaves changes and immediately shuts down and restarts the system, so parametersettings take effect immediately. Exit (No Save)Exits Setup, without saving changes. Default SettingsRestores all Parameter settings to their default settings. Default settings take ef-fect on the next system startup.Using Power ManagementPower Management in the NEC Versa 2600 lets you conserve energy, save battery power,extend the life of your LCD backlight, and protect against data loss due to low batterypower.You can set some features to function automatically or activate them manually with thekeyboard or a button.Power Saving ModesThe NEC Versa 2600 has three different power consumption states. These include: Active Mode — All components are turned on and active.NOTEEven in Active Mode, you can specifytimeouts for the LCD panel, hard disk drive andCPU. See “Power Management Settings.” Standby Mode — Eliminates unnecessary battery or AC power consumption.The LCD panel, Hard Disk Drive and CD-ROM reader all shut down, and theKeyboard Controller and CPU slow down, providing both privacy and powersavings.To end Standby mode, press any key and return to Active mode. Suspend Mode — Shuts down every system component, except those thatpreserve unsaved data in memory, or system status and PCMCIA cards if soconfigured.SOLD BY laptopia2005 DO NOT RESELL!!SOLD BY laptopia2005 DO NOT RESELL!!
